Page 73

2016WinterShotcreteEMag

New Products & Processes • Electric power: 50 hp, 440 V, 3-phase, 60 Hz (50 Hz is also available) • Diesel power (optional) • Variable displacement hydraulic piston pump (displacement 71cc) • Quick disconnects (hydraulic, electrical) for ease of setup and cleanup • Power pack will store under the M2200 mixer during transport The M2200 Pan Mixer was designed to be easy to transport. The four legs of the mixer quickly shorten to reduce the shipping height. The water tank folds downward for transport. The hydraulic power pack slides underneath the mixer. A forklift driver can quickly unload the M2200 from a flatbed truck using the forklift tubes on the mixer and the power pack. Contact REED Shotcrete Equipment at (909) 287-2100 or visit www.reedpumps.com. Mix-Elvator™ Batch Plant has New Features The Mix-Elvator™ dry-process shotcrete (gunite) batch plant, manufactured by Airplaco Equipment Co., features a new variable hydraulic flow control. The new flow control design allows even greater ease when proportioning materials in the batch plant. The contractor can control the ratio of sand and cement materials by adjusting the speed of two feed augers. These feed augers direct materials to a mix auger, where they are blended and before loading into the dry-mix shotcrete machine. In addition, Airplaco has centralized all operator controls for the machine to offer greater ease of use. The Mix-Elvator design allows dry-process shotcrete contractors to mix their own material at the jobsite. It is a reasonably sized machine that can be towed behind contractors’ existing vehicles. The Mix-Elvator features a 30 hp diesel engine and hydraulic-ratio control system and optional pre-dampener spray bar system. It has a maximum mixing capacity of up to 20 yd3/h (15.3 m3/h), sand hopper capacity up to 45 ft3 (1.3 m3), and cement hopper capacity of 4 ft3 (0.1 m3). Combined with the C-10 dry-process shotcrete (gunite) machine, the Mix-Elvator offers a self-contained rig for construction and repair applications. Contact Airplaco Equipment Co. at (888) 349-2950 or visit www.airplaco.com. REED Now Offers Pan Mixers REED Shotcrete Equipment’s new Pan Mixer can mix a 2200 lb (998 kg) batch of materials in 3 minutes. The mixer then quickly discharges the material into the pump hopper to be either sprayed or pumped. The M2200 features: • Variable-speed mixer blade rotation (hydraulic motor drive, 59 rpm max, torque 13,762 Nm) • Manual retractable legs, four each • Forklift tubes and lifting eye kit for easy lifting and transport • Work platform with control box and safety railing • Quarter panel safety grates cover with cutoff switch • Stainless steel water tank for precise water measurement (optional) (plastic is standard) • Bolt-on style paddles for easy change-out • Bag splitter • NEMA 4 fully enclosed weatherproof control box mounted on operator platform • Power on-off, mixer stop-start, e-stop, horn-reset, mixer rpm control, primary discharge open-close, cleanout discharge open-close, cleanout tilt up-down, hydraulic pressure gauge and amp meter Dimensions: • Length: 96 in. (8 ft) 2.4 m • Width: 86 in. (7 ft, 2 in.) 2.2 m • Height: ◦◦ Minimum: 102 in. (8 ft, 6 in.) 2.6 m (for transport) ◦◦ Maximum: 154 in. (12 ft, 11 in.) 3.9 m (for operation at max height) ◦◦ Minimum clearance under discharge door: 47 in. (3 ft, 11 in.) 1.2 m ◦◦ Maximum clearance under discharge door: 77 in. (6 ft, 5 in.) 2 m • Mixer weight: 6600 lb (2994 kg) The M2200 Pan Mixer can also be powered by a small hydraulic power pack (sold separately). Power pack information is as follows: Shotcrete • Winter 2016 71


2016WinterShotcreteEMag
To see the actual publication please follow the link above